Sanyo abc-vw24 Service Manual page 8

Operation of the Sterilized and Electrolyzed Mist
The Operation of Electrode Power Generation
The operation to energize the electrode to create electrolyzed water repeats operation and
stopping as shown in the chart below.
Operation of Electrolysis Operation (1)
Electrolyzing On
Electrolyzing Off
In operation (1) and operation (2), the polar character of the electrode is reversed.
When the power plug is inserted and the switch first turned on, or when the tank is reset,
operation (1) will last 10 minutes the first time it is conducted. Subsequently, the operation/ stop
process shown in the chart above will be repeated.
The first occasion of power mist operation will last 30 minutes. Subsequently, the operation/ stop
process shown in the chart above will be repeated. (During the 30-minute operation on this first
occasion, the polar character during the energizing process is positive for 15 minutes and then
switched to negative for 15 minutes.
Sterilized and Electrolyzed
Mist Outlet
Front Electrolyzed
Water Lamp (Blue)
<General Indication of the Volume of Sterilized and Electrolyzed Mist Released
Manual – (High) About 7cc/hr Continuously for about 31 hours
Automatic – (Low) About 0.5cc/hr Continuously for about 440 hours (about 18 days)
*At times of automatic operation, there will be differences in the volume of mist released
because each of the sensors will operate according to the situation in the room and the
sterilized and electrolyzed mist will be operated in accordance with what the sensors detect.
Stop
4 minute
56 minute
7 hours
4 minute
56 minutes
Add Water Lamp (Red)
- 8-
Operation (2) Stop
4 minute
56 minute
7 hours
4 minute
56 minutes
Upeer Electrolyzed
Water Lamp (Green)
Electrolyzed
Water Button
ABC-VW24