Sanyo abc-vw24 Service Manual page 18

Replacement Procedure
(8) Replacing Control Circuit B (Sensor)
1, Remove the 2 air guide A setscrews
and remove air guide A.
Substrate B (sensor)
Air guide A setscrews
2, Remove the 2 insulator P setscrews and
remove insulator P.
3, Remove the 2 Control circuit B setscrews
and remove Control circuit B (sensor).
4, Remove all of the Control circuit B
(sensor) connectors.
Control circuit B setscrews
Dust sensor setscrew
Dust sensor
Insulator P
(9) Replacing the Dust Sensor
1, Remove the dust sensor setscrew and
remove the dust sensor.
Jul./2007 Printed in Japan
Photo -11
Air guide A
Photo - 11 Photo - 11
Photo – 12
Photo – 12
Photo – 12
Control circuit B (display)
Insulator P setscrews
Photo - 12
Photo - 12
(10) Replacing the Fan Motor
1, Remove the fan retaining nut and
remove washers A and B, and the
fan lock piece.
2, Pull the fan off the motor shaft.
Fan retaining nut
Washers A and B
Fan lock piece
3, Remove the cord cover and take out the
motor cord.
4, Pull washer C off the motor shaft.
5, Remove the 3 motor retainer setscrews
and remove the fan motor.
Motor retainer setscrews
SANYO Electric Co.,Ltd
- 18-
Osaka, Japan
ABC-VW24
Photo – 13
Photo - 13
Fan
Photo - 13
Photo – 14
Photo - 14
Cord cover
Motor retainer
Fan motor
Photo - 14