Specifications; Standard Accessories; Battery Removal/Installation - Hitachi DS 14DCL Handling Instructions Manual

10. Do not use in a location where strong static
electricity generates.
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the
equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-
problems.

SPECIFICATIONS

POWER TOOL
Model
No-load speed (Low/High)
Wood
(Thickness 18mm)
Drilling
Metal
Capacity
(Thickness 1.6mm)
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains
the accessories listed in the table below.
1 Plus driver bit (No. 2 × 65L) ...... 1
DS14DCL
2 Charger .................................................. 1
DS18DCL
3 Plastic case ....................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BCL1415)
(For DS14DCL)
2. Battery (BCL1815)
(For DS18DCL)
Optional accessories are subject to change without
notice.
DS14DCL
0 – 450 / 0 – 1250 min
30 mm
Steel: 12 mm,
6 mm
6.2 mm (diameter) × 63 mm (length)
(Requires a pilot hole)
BCL1415 Li-ion 14.4 V (1.5 Ah 4 cells)
1.4 kg
UC18YKL
7.2 – 18V
0.4 kg
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
–1
6.8 mm (diameter) × 50 mm (length)
BCL1815 Li-ion 18 V (1.5 Ah 5 cells)
APPLICATIONS
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals.
Drilling of various woods.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch
to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
English
DS18DCL
–1
0 – 450 / 0 – 1250 min
38 mm
Steel: 13 mm,
6 mm
(Requires a pilot hole)
1.6 kg
34