Dhcp Configuration Of Tcp/Ip In Windows 2000 - NETGEAR 108 MBPS WIRELESS WGT624 V3 Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
• Verify that the Obtain an IP address
automatically radio button is selected.
• Verify that Obtain DNS server address
automatically radio button is selected.
• Click the OK button.
This completes the DHCP configuration of TCP/
IP in Windows XP.
Repeat these steps for each PC with this version
of Windows on your network.

DHCP Configuration of TCP/IP in Windows 2000

Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows
2000.
C-10
202-10090-02 v 1.4, July 2005
Preparing Your Network