Initial Configuration - NETGEAR 108 MBPS WIRELESS WGT624 V3 Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3

Initial Configuration

Insert the Resource CD into the CD drive on your PC. The following screen appears:
1.
Figure 3-1: Smart Wizard Installation Assistant Startup screen
Click Setup and follow the instructions. The Smart Wizard Installation Assistant will guide
2.
you through the setup process:
• How to change your cabling.
• How to connect to the Internet.
• How to configure your wireless settings.
– When you get to the wireless settings, you will have to select the country where you
are located and decide whether you want to have security on your wireless links
(Netgear strongly recommends enabling security).
– Depending on the type of security you select, you will also have to enter security key
or passphrase information (see
the wireless authentication and encryption parameters).
3-2
"Wireless Settings" on page 3-10
Configuring the Internet and Wireless Settings
202-10090-02 v 1.4, July 2005
Click SETUP
to get started
for information on