Configuration File Management; Restoring And Backing Up The Configuration - NETGEAR 108 MBPS WIRELESS WGT624 V3 Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3

Configuration File Management

The configuration settings of the WGT624 v3 wireless router are stored within the router in a
configuration file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the
user's PC, or cleared to factory default settings.
From the Main Menu of the browser interface, under the Maintenance heading, select the Settings
Backup heading to bring up the menu shown below.
Figure 5-6: Settings Backup menu
Three options are available, and are described in the following sections.

Restoring and Backing Up the Configuration

The Restore and Backup options in the Settings Backup menu allow you to save and retrieve a file
containing your router's configuration settings.
To save your settings, select the Backup tab. Click the Backup button. Your browser will extract
the configuration file from the router and will prompt you for a location on your PC to store the
file. You can give the file a meaningful name at this time, such as pacbell.cfg.
To restore your settings from a saved configuration file, enter the full path to the file on your PC or
click the Browse button to browse to the file. When you have located it, click the Restore button to
send the file to the router. The router will then reboot automatically.
Maintenance 5-7
202-10090-02 v 1.4, July 2005