Dhcp Configuration Of Tcp/Ip In Windows 2000 - NETGEAR MR814v2 Reference Manual
Cable/dsl wireless router
Hide thumbs
Also See for MR814v2:
- Installation manual (2 pages) ,
- User manual (45 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the MR814v2 Cable/DSL Wireless Router
• Verify that the Obtain an IP address
automatically radio button is selected.
• Verify that Obtain DNS server address
automatically radio button is selected.
• Click the OK button.
This completes the DHCP configuration of TCP/
IP in Windows XP.
Repeat these steps for each PC with this version
of Windows on your network.
DHCP Configuration of TCP/IP in Windows 2000
Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows
2000.
C-10
Preparing Your Network
Advertisement
Table of Contents
Troubleshooting
