Timex W223 User Manual page 18

ENGLISH
minute hand, and chronograph hour hand return
to zero position.
TIME MEASUREMENT
RESET
CHRONOGRAPH RESET
(INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the
chronograph second hand does not return to zero
position after the chronograph has been reset,
including after the battery has been replaced.
1) Pull the crown out to the 2nd position "C".
2) Press pusher "A" to set the chronograph second
hand to the zero position. The chronograph hand
can be advanced rapidly by continuously pressing
pusher "A".
3) Once the hand returns to zero position, return the
crown to the normal position.
28
*Do not push crown to normal position while the
chronograph second hand returns to zero position.
It stops on the way when crown is returned to
normal position and its position is recognized as
STOP
zero position.
ENGLISH
29