Magicsafe Ms660 - Waeco MagicSafe MS660 Installation And Operating Manual

_MS660.book Seite 94 Montag, 2. August 2010 8:03 20
Using MagicSafe
10.6 Using the convenience locking function
If the vehicle has been equipped with a convenience module and software
function 4 "Convenience locking function" is activated, you can use the hand-
held transmitter to, e. g.:
Close windows
Close the sunroof
Lock the boot or fuel tank lid
Switch on dipped headlights
Switch on the parking heating
To do this, proceed as follows:
➤ Press and hold the "Lock" button until e. g. the vehicle windows have
closed completely.
NOTE
I
Alternatively, you can program the control to a fixed duration of
25 sec. (software function 19, see chapter "Programming Magic-
Safe" on page 81).
10.7 Displaying the cause of the alarm
MagicSafe stores triggered alarms. The memory can display the last five
alarm situations.
If an alarm was triggered, this is indicated by a short flashing of the indicator
(0.5 sec.) when the vehicle is unlocked.
This is how to display the cause of the alarm:
➤ Deactivate the alarm system by pressing the "Unlock" button.
➤ Press the "Lock" and "Unlock" buttons simultaneously.
94

MagicSafe MS660