Using Magicsafe; Magicsafe Ms660 - Waeco MagicSafe MS660 Installation And Operating Manual

_MS660.book Seite 87 Montag, 2. August 2010 8:03 20

MagicSafe MS660

10

Using MagicSafe

10.1 Function table
The following table lists all of the functions and how you can activate them.
Function
Activating
Deactivating
Manual locking/
unlocking of the doors
from the inside
Activating without
interior monitoring
Panic mode
Convenience output
Convenience output
●
Press the respective button
● ● (1 sec.)
Press the button twice in a row within 1 sec.
● ● (30 sec.)
Press the button twice in a row within 30 sec.
10.2 Activating MagicSafe
To activate the alarm system manually, proceed as follows:
➤ Close the doors of the vehicle.
➤ Press the "Lock" button on the hand-held transmitter for approx. 1 sec.
✓ The hazard lights flash twice.
✓ The alarm system is activated after approx. 30 sec. The status LED
flashes in confirmation.
Condition
Ignition off
Ignition off
Alarm system activated
Ignition on
Ignition off
Ignition off
Alarm system activated
Ignition off
Alarm system activated
Ignition off
Alarm system
deactivated
Using MagicSafe
"Lock" "Unlock"
button button
●
●
●
● ● (30 sec.)
● ● (1 sec.)
"COMFORT"
button
●
●
87