Pairing The Keyboard With A Connected Device; Using Iphone/Ipad/Ipod Touch - Elecom TK-MBD041 series Supplementary Manual

Pairing the Keyboard with a Connected Device

To connect this product to a connected device using Bluetooth
• Pairing involves registering Bluetooth
• To use Bluetooth functions, the connected device must support the profile used by this product.
®
Note, however, that some functions may not be available depending on the Bluetooth

Using iPhone/iPad/iPod touch

*
The instructions below are based on the iPhone 4 (iOS 5.1) user
interface. The procedure is the same for other models.
*
When using the iPhone 3GS or 3G iPod touch, you must update the
software to iOS 4.0 or later.
For instructions on updating the software, refer to the iPhone 3GS
or 3G iPod touch manual.
*
This product cannot be used with the iPhone 3G or with the first
and second generation iPod touch.
Touch [Settings].
Touch [General].
Touch [Bluetooth].
While the device is searching for other
devices, press the
together to enter pairing mode.
[Pairing] is displayed in the message field
on the LCD display of the keyboard.
The LED lamp flashes blue during the
pairing procedure and turns off when the
procedure is complete (step
devices with each other, and authorizing a connection with a registered device.
®
and keys
.
, you need to pair the product with the connected device.
®
device specifications even if the same profile is supported.
®
Touch [ELECOM TK-MBD041 Not
Paired].
If iPhone 3GS or iPod touch
cannot find the keyboard,
check that the software has
been updated to iOS 4.0 or
later.
Product connection starts.
Pairing is completed success-
fully when [ELECOM TK-MBD041]
is shown as [Connected].
[Pairing Success] is displayed in the
message field on the LCD display of the
keyboard.
You can now use this product.
5