Before The Product Can Be Used; Charging The Keyboard; Turning On/Off - Elecom TK-MBD041 series Supplementary Manual

Before the product can be used

Before using for the first time, this product and the connected device need to be operated and set in the following order:
1
Charging
Charging is required before using this product for the first time.
Refer to "Charging the Keyboard" for detailed instructions.
2
Turning ON
Press the key for approx. 3 seconds to power ON.
3
Pairing
(See p.5 and later)
Press the and
4
Using the keyboard

Charging the Keyboard

Be sure to charge this product when using it for the first time or after a long
period of non-use.
Use the included USB charging cable for charging.
• It takes about 3 hours to fully charge this product.
If the charging indicator lamp does not turn off after 3 hours,
immediately disconnect the USB charging cable and stop
charging. Charging for more than 3 hours can shorten the
battery life and may lead to device failure.
• When charging from a wall outlet, use a separately-sold
ELECOM USB AC adapter.
Connect the USB [microB]
connector of the included USB
charging cable to the charging
connector of this product.
Connect the [USBA] connec-
tor of the USB charging cable
to a USB port on your PC.
Or, use a USB AC adapter to
charge from a wall outlet.
Carefully check the connector orientation and where to
insert.
Turn on the PC, if not on already.
The battery symbol on the LCD display
changes to indicate charging.
The LED lamp lights red and charging starts.
The lamp lights blue when charging is completed.
Stop charging even if it does not indicate charging is
completed after the specified charging time. Otherwise,
battery leakage, heat generation, burst, or ignition may
occur.
keys together for pairing.
Press and hold
for 3 seconds.
For detailed instructions on the pairing procedure,
refer to "Pairing the Keyboard with a Connected
Device" ( page 5).

Turning ON/OFF

Turning ON
…
Turn on the keyboard to use it.
Press and hold the
approx. 3 seconds.
The LCD display is turned on.
This product searches for a
device that is already paired
with it and connects
automatically, if connect-
able.
The keyboard enters standby
mode if no connectable device
is found.
About power saving mode
If this product has not been operated for approx. 30 sec-
onds, it automatically switches to power saving mode and
the LED lamp flashes blue every 1 second.
It returns to normal mode if any key is pressed.
Turning OFF
…
When not using this product, turn the keyboard off to save battery
power.
Press and hold the
approx. 3 seconds.
The LCD display is turned off.
4
button for


button for