Led Indication; Sound Indication - Teletek electronics LCD62 User Manual

LED Indication

LED Lit
Ready (green) System ready
Arm (red) System armed
Trbl (orange) -

Sound Indication

There are seven different sound combinations that indicate
seven different conditions:
Click – single short beeps indicating button pressing
Confirm – two long beeps indicating the system confirmation
to executed operation (arming, disarming, settings change,
etc.)
LCD62 Keypad User Manual
Blinking
Programming mode
Entry or exit time
Technical problem
Reject – single long beep indicating incorrectly executed
operation
Entrance time – continuous beep indicating intrusion into the
entrance zones.
Exit time – short beeps indicating the system is armed and
the user is required to leave the zone. Ten seconds before
the exit time is over beeps frequency is increased.
Trouble – two short beeps indicating problem with the
system (battery low, no supply voltage, etc.)
Chime – short beeps with subsequently increasing period
indicating intrusion into a zone with a "Chime" option
activated
9