Gira KNX/EIB Operating Instructions Manual page 4

Hide thumbs Also See for KNX/EIB:

KNX/EIB

Push button sensor 3 Plus F100

Select week Mon...Son, Mon...Fri, weekend Sat...Son or an individual weekday and press

OK.

Select operating mode for the switching time and press OK.

For the next 15 seconds the display summarises the settings for the selected program slot.

Confirm with OK.

i After 15 seconds elapse – or when any other button is pressed – the setting procedure is

aborted without saving.

Heating timer: deleting the switching time

Open menu "Settings", select "Delete heating timer" and press OK.

The display shows the first program slot.

Select the program slot to be deleted with n/o and press OK.

If you really want to delete the program slot, then press > once again.

If you do not want to to delete the program slot, then press × or any other button, or wait

for approx. 15 seconds.

5 Information for electrically skilled persons

5.1 Fitting and electrical connection

DANGER!

Electrical shock on contact with live parts in the installation environment.

Electrical shocks can be fatal.

Before working on the device, disconnect the power supply and cover up live

parts in the working environment.

Mounting and connecting the device

(5) Bus coupler 3

(6) Frame

(7) Push button sensor

(8) Locking screws

(9) ESD protection mat

(10) Rocker support

32575712

10860212

Figure 3

26.07.2013

4/7

Table of Contents