Network Setup - D-Link DCS-2310L User Manual

Section 4: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any
changes, click the Save Settings button to save your changes.
LAN Settings:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP Presentation:
D-Link DCS-2310L User Manual
This section lets you configure settings for your local area
network.
DHCP: Select this connection if you have a DHCP server running
on your network and would like your camera to obtain an IP
address automatically.
If you choose DHCP, you do not need to fill out the IP address
settings.
You may obtain a static or fixed IP address and other
network information from your network administrator for
your camera. A static IP address may simplify access to your
camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the
same subnet. The default value is 255.255.255.0.
The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the
failure of transmissions to a different subnet.
The primary domain name server translates names to IP
addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be configured as
a UPnP device on your network.

Network Setup

32