D-Link DCS-2310L User Manual page 44

Section 4: Configuration
Erase Motion Area:
D-Link DCS-2310L User Manual
Use your mouse to click and drag on the area that you
would like to monitor for motion.
To erase a motion detection area, simply click on the red
square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
ƒ Select All: Draws a motion detection area over the
entire screen.
ƒ Clear All: Clears any motion detection areas that
have been drawn.
ƒ Restore: Restores the previously specified motion
detection areas.
44