D-Link DCS-2310L User Manual page 34

Section 4: Configuration
Enable the IPV6 setting to use the IPV6 protocol. Enabling
the option allows you to manually set up the address, specify
an optional IP address, specify an optional router and an
Enable IPV6: optional primary DNS.
The DCS-2310L allows you to multicast each of the available
streams via group address and specify the TTL value for each
stream. Enter the port and TTL settings you wish to use if you
Enable Multicast for stream
do not want to use the defaults.
D-Link DCS-2310L User Manual 34