Table of Contents
Advertisement
When the access point has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM interval value. Access
point clients hear the beacons and awaken to receive the broadcast and
multicast messages.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be
able to communicate with the access point. For secure purpose, user may
want to disable SSID broadcast to allow only those wireless clients with the
AP SSID to communicate with the access point.
TX Rates: Select one of the wireless communications transfer rates,
measured in megabytes per second, based upon the speed of wireless
adapters connected to the WLAN.
CTS Mode:
None: Disable CTS function.
Always: Regardless of wireless environment (11b or 11g), platform will
always transfer 11b packet.
Auto: AP soon detected the wireless environment and decided the
transmission packet, either 11b or 11g.
11g Only Mode: To setting the AP operation mode for 802.11g only or
802.11b/802.11g mix mode.
SuperG Mode: From the drop list, if you like to use Super-GTM to enhance
the speed, there are three options on Super-GTM mode: Super G without
turbo; Super G with Dynamic turbo and Super G with Static turbo. The turbo
mode indicates the combination of two channels to enhance the throughput.
Super G without turbo indicates that it is on Super G mode without the
channel's combination. Dynamic turbo is able to automatically detect if any
'Super-GTM based' product is available. If no, the connection is via 'normal'
G. Static turbo means it will not go back to 'normal' G once it starts.
Antenna transmit power: Adjust the power of the antenna transmission by
selecting from the drop down list for full, half (-3dB), quarter (-6dB), eighth (-
9dB) and min.
Aging Interval: To limited STA connect timing.
Wireless 108Mbps Multi-Function Access Point
A02-WAP-54G
Pag. 28
Advertisement
Table of Contents
