HP HPE StoreOnce 3100 Series Maintenance And Service Manual page 39

Table 16 RBSU settings for HPE StoreOnce 3500 Series and HPE StoreOnce 5100
System
Top menu item
Boot options
Power Management
Options
Performance
Options
Advanced Options
Date and Time
BIOS Serial Console
and EMS
USB Options
5. Press F10 to save. Then press ESC until the System Utilities menu is displayed.
At this point, you can either press ESC to exit System Utilities and continue with the system
reboot.
Or, if there are no DHCP–assigned IP addresses, you can manually configure iLO using the
local console. Select System Configuration.
6. Select the iLO 4 Configuration Utility.
Sub menu 1 Sub menu 2
Boot Mode
HP Power Profile
Advanced Node interleaving
Performance Tuning
Options
Advanced System Product ID
ROM Option
Thermal
configuration
Time (hh:mm:ss)
Time zone
BIOS Serial Console
Port
Embedded User
Partition
After replacing the motherboard—BIOS and iLO configuration
Current default
state Change to...
UEFI Mode Legacy BIOS mode
Balanced Power and Maximum
Performance performance
Disabled Enabled - i.e Turn
NUMA off for the OS
HPE 3520:
794751-B21
HPE 3540:
797731-B21
HPE 5100:
794752-B21
Optimal Cooling Increased cooling
As appropriate
UTC-07:00, As appropriate
Mountain Time (US
& Canada)
Auto Physical
Disabled Only if 'enabled' in
the first place
39