Hpresetpassword Account - HP HPE StoreOnce 3100 Series Maintenance And Service Manual

### END #######################################################################
Command Successful

HPresetpassword account

The HPresetpassword account provides a method for the local Admin user to recover the Admin
password back to a default state.
username = HPresetpassword
default password = hpresetpassword
Best practice is to change the default password after installation.
This user account does not provide any access to StoreOnce functions or data that may already
be on the system.
To change the password for the HPresetpassword account
1. Gain access to the local system console either using a locally attached USB keyboard and
monitor or via the iLO remote console.
NOTE:
2. At the Login prompt type the username (HPresetpassword) and default password
(hpresetpassword):
3. A list of available commands will be presented.
reset: Reset the 'Admin' password to 'admin'
manage: Change the 'HPresetpassword' user's password
help: List available commands
exit: Log out
4. Run the command manage to change the password for the HPresetpassword user. At the
prompts provide:
(current) UNIX password: the default at installation is hpresetpassword
New UNIX password: the new password should be strong and memorable; it will not
be accepted if it is weak, for example a dictionary name
Retype new UNIX password:re-enter the new password to confirm it
5. Type exit to log out.
6. Store the new password securely in an offline Password Security tool.
To reset the password for the local Admin user
1. Gain access to the local system console either using a locally attached USB keyboard and
Monitor or via iLO remote console.
2. At the Login prompt type: HPresetpassword
3. When prompted for the password enter the current password. The default is
hpresetpassword, but if you are following best practices you will have changed this after
installation.
4. Once logged in a list of available commands will be presented.
5. Type reset; this will immediately reset the default password of the Admin user to admin.
6. Type exit to log out.
This account is not accessible via a remote ssh session.
HPresetpassword account 33