TP-Link tl-wps510u Quick Installation Manual page 18

Note: If you wish to install more print servers, start setup wizard from your Windows
Start menu: start
TCP/IP Printer Port
How to create print server port manually?
1. From your Windows Start menu: start
System Tools
2. Find your installed printer icon, right-click, select Properties
Port Standard TCP/IP Port
3. Input the exact IP address of print server that you configured it. Click Next.
4. Select Custom, and click Settings.
5. Choose LPR, and input the queue name as lp1.
6. Click OK Next
7. Click Close
8. Now, the print server port has been created.
How to know the current settings of print server?
1. Plug the AC power adapter into the power connector on the print server.
2. Wait 40 seconds as part of the print server's Power On Self Test (POST).
3. Press the reset button for 8 seconds, and then release it.
4. Then, the test page includes the current settings of print server will be printed
out.
All Programs
PSWizard and repeat the installation procedure.
Control Panel
Finish, to complete the wizard.
Apply.
Network Print Server
All Programs
Hardware and Sound
New Port Next.
17
Standard
Accessories
Printers.
Ports Add