Removing Front Wheel - BMW R 1200 R Rider's Manual

the basis for all necessary calcu-
lations. A change in these sizes
due to conversion to others than
the wheels installed as standard
equipment can seriously affect
the control comfort of these sys-
tems.
The sensor wheels required for
wheel speed detection must also
match the control systems in-
stalled and may not be replaced.
If you want to equip your mo-
torcycle with different wheels,
please speak to a specialized
workshop, and preferably a BMW
Motorrad retailer. In some cases
the data stored in the control
units can be adapted to the new
wheel sizes.
TPC/RDC sticker
with Tire Pressure Control
OE
(TPC/RDC)
The TPC/RDC sensors can
be damaged in case of im-
proper tire mounting.
Inform the authorized BMW
Motorrad retailer or the
specialized workshop on the fact
that the wheel is equipped with a
TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the TPC/
RDC sensor. During a tire
change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
specialized workshop of the TPC/
RDC sensor.

Removing front wheel

Make sure ground is level and
firm and park motorcycle.
with BMW Motorrad Integral
ABS OE
Unclip two retaining clips 1
of the sensor cable on brake
line.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
8
93
z