Beem i-Joy Café 15 bar User Manual page 28

24 EN
Making espresso/coffee with coffee
powder (image D1)
1 Brewing a cup of espresso
To brew a simple espresso/coffee with coffee
powder, proceed as follows:
1. Check the drip trays (16, 17) and empty if
necessary.
2. Check the water level in the water tank
(3) and add water, if necessary.
3. Switch on the appliance and allow it to
heat up.
4. Remove the strainer holder (15) and put
in the strainer insert (10).
5. Fill the strainer insert (10) with coffee
powder to the top and wipe off any excess
coffee powder with the handle of the measur-
ing spoon (9).
NOTE
► Do not overfill the strainer insert. An
overfilled strainer insert cannot be inserted
into the appliance.
6. Remove any surplus coffee powder from
the edge of the strainer holder in order not to
stain the seal of the strainer holder mounting.
7. Press the coffee powder lightly but firmly
using the compacting aid of the measuring
spoon.
8. Insert the strainer holder (15) into the ap-
pliance as described in the section Inserting
the strainer holder (page 23).
9. Pull out the drip tray (16) from under the
milk container (5) as described in the sec-
tion Using drip trays and cups or glasses
(page 23) and place a cup onto the resting
grate.
10. Press the selector button
1 x. The coffee is brewed and runs into the
cup. The brewing process finishes automa-
tically or when the selector button (12) is
pressed briefly to cancel brewing.
11. Use the ON/OFF switch (4) to switch the
appliance off.
Brewing a double espresso or 2 cups
of espresso
To brew 2 cups of espresso at the same time,
proceed as follows:
1. Prepare the appliance as described
above but use the strainer insert for 2 cups
(11).
2. Place 2 cups next to each other on the
drip tray (16) so that one of the openings in
the strainer insert can fill one cup each.
3. Press the selector button
2 x. The brewing process finishes automa-
tically or when the selector button (12) is
pressed briefly to cancel brewing.
4. Use the ON/OFF switch (4) to switch the
appliance off.
To brew a double espresso with coffee pads,
proceed as follows:
1. Prepare the appliance as previously de-
scribed.
2. Push the large drip tray (16) under the
milk container (5).
3. Place a suitable cup onto the resting
grate of the small drip tray (17).
4. Press the selector button
2 x. The brewing process finishes automa-
tically or when the selector button (12) is
pressed briefly to cancel brewing.
5. Use the ON/OFF switch (4) to switch the
appliance off.
Brewing coffee/lungo/diluted black coffee
To brew coffee/lungo/diluted black coffee,
proceed as follows:
1. Check the drip trays (16, 17) and empty if
necessary.
2. Check the water level in the water tank
(3) and add water, if necessary.
3. Switch on the appliance and allow it to
heat up.
4. Remove the strainer holder (15) and put
(12)
in the strainer insert.
NOTE
►
coffee, a smaller or larger strainer insert
can be used.
5. Fill the strainer insert with coffee as de-
scribed above.
6. Insert the strainer holder (15) into the ap-
pliance as described in the section Inserting
the strainer holder (page 23).
BEEM - Elements of Lifestyle
Depending on the strength of the
(12)
(12)