Medisana ThermoDock Instruction Manual page 58

5 Operation
22
GB
NOTE
You can enter the
measurement manually if
you are using a standard
thermometer.)
2. As soon as the ThermoDock
system is active, a blue LED
lights up on the ThermoDock.
3. The device begins to measure
the temperature as soon as
you touch the "Start" button
on the display, accompanied
by an acoustic signal.
Immediately after touching
the "Start" button, pass the
ThermoDock from the centre
of your forehead to your
temple at a distance of
approx. 5 cm.
The module records the
temperature at the forehead
and temple and converts it
into a measurement.
4. You will hear a signal when
measuring is complete.
After approx. 2 seconds
the measurement appears
on the display.