Atlantis Land NetPower AV A02-PL300 Owner's Manual page 45

•
Remote Private Network Name
Plug the remote HomePlug AV when changing the Private Network
Name.
To change the Private Network Name of a remote HomePlug AV:
1. Open HomePlug AV Utility.
2. Click Encryption tab.
3. Enter the new Private Network Name. This field is case sensitive.
4. Select Change Private Network Name of remote device.
5. Enter the Device ID of the remote device. The Device ID is
printed on the device.
6. Click Apply. The remote HomePlug AV restarts and saves the
new password.
7.
Power cycle the local HomePlug AV. To power cycle, you need to
turn the HomePlug AV off and then on again
To effectively communicate with each other, all HomePlug AVs
in the network should maintain a similar Network Password.
If you have multiple HomePlug AVs, you have to set the
Network Password of each HomePlug AV from the same
computer before using them with other devices.
The remote HomePlug AV should be plugged when changing
the Network Password.
To effectively communicate with each other, all HomePlug AVs
in the network should maintain a similar Network Password.
ENGLISH
.
46