Related Manuals for Atlantis Land NetFly Wireless USB Adapter USB 54
Summary of Contents for Atlantis Land NetFly Wireless USB Adapter USB 54
- Page 1 NetFly USB 54 Wireless USB Adapter USER MANUAL A02-UP1-W54(V1.1)_ME01 Where solutions begin ISO 9001:2000 Certified Company...
- Page 2 Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 2 years On-Center warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
- Page 3 WARRANTY. The Atlantis Land logo is a registered trademark of Atlantis Land. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice.
-
Page 4: Table Of Contents
INDEX 1. INTRODUCTION ...8 2. UNPACKING AND SETUP...8 2.1 Unpacking...8 2.2 Setup ...8 3. HARDWARE INSTALLATION ...9 3.1 LED Indicator...9 3.2 Check the installation ...9 4. SOFTWARE INSTALLATION...9 4.1 Utility and Driver Installation for Windows ...9 5. WINDOWS VISTA WIRELESS UTILITY SETTING ...11 5.1 Link Information ...11 5.2 Configuration ...12 5.3 Site Survey ...13... -
Page 5: User Manual
Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land. All other names mentioned mat be trademarks or registered trademarks of their respective owners. - Page 6 CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.
- Page 7 Outdoor Italy: For more info, consult the website 2400-2454 2454-2483,5 www.comunicazioni.it Wireless USB Adapter USER MANUAL 100mW(20dBm) 10mW(10dBm)
-
Page 8: Introduction
1. INTRODUCTION Congratulations on your purchase of this 802.11g Wireless USB 2.0 Adapter. This manual helps to get familiar with the 802.11g Wireless USB 2.0 Adapter. This manual contains detailed instructions in operation of this product. Please keep this manual for future reference. With a Wireless LAN (IEEE 802.11g) USB 2.0 Adapter, a desktop or laptop computer can communicate with another computer in a wireless way. -
Page 9: Hardware Installation
• Visually inspect the USB Adapter and make sure that it is fully plugged in to the USB slot. • Make sure that there is a well environment that there is no much intrusion to have a better connection. 3. HARDWARE INSTALLATION 3.1 LED Indicator Link The Link LED indicator lighted green when the Wireless Adapter is... - Page 10 If you need to install the driver manually, refer each Windows OS to the following CD-Rom directory path: D:\USB\Driver\<Windows OS>. Note: (D:\ will depends on where the CD-ROM drive is located and <Windows OS> will depend on the Windows OS you are using). Click on “A02-UP1-W54”...
-
Page 11: Windows Vista Wireless Utility Setting
USER MANUAL 5. WINDOWS VISTA WIRELESS UTILITY SETTING 5.1 Link Information This is the default screen after launching the Utility program. Status: Shows the associated BSSID, which can be used to identify the wireless access point. SSID: Shows the current SSID, which must be the same on the wireless client and AP in order for communication to be established. -
Page 12: Configuration
5.2 Configuration This screen is where you set the basic wireless settings for the Wireless LAN USB 2.0 Adapter. Profile Name: The default name is the same as the SSID of the platform which you connected and you can change the name you favor( the key length is limited 1~32 bits). -
Page 13: Site Survey
Open System and Shared Key require the users to set a WEP key to exchange data with other wireless clients that have the same WEP key. The following will only be activated when Open, Shared Key is enabled: Default Key: select one of the 4 keys to use. Network Key: choose the encryption way, either in HEX or ASCII formats, and enter the password in the blank space. -
Page 14: Profile
USER MANUAL 5.4 Profile The user can create and manage the created profiles for home, work or public areas. By double-clicking on one of the created profile, the setting will adjust to the specific setting such as SSID, channel, and encryption as saved by that particular profile. -
Page 15: Windows Xp/2000/Me/98 Wireless Utility Setting
USER MANUAL 6. WINDOWS XP/2000/ME/98 WIRELESS UTILITY SETTING 6.1 Link Information The default page is as below after launching the Utility program. Status: Shows the associated BSSID, which can be used to identify the wireless network. SSID: Shows the current SSID, which must be the same on the wireless client and AP in order for communication to be established. -
Page 16: Configuration
6.2 Configuration This screen is where changes the basic wireless settings for the wireless LAN adapter with the minimum amount of effort to implement a secure wireless network environment. SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network. - Page 17 • Continuous Access Mode (default) – the wireless LAN adapter is constantly operating with full power. This mode consumes the most power. • Maximum Power Save – the wireless LAN adapter consumes the least power. This mode only operates when there is wireless network activity.
-
Page 18: Advanced
6.3 Advanced This screen is where you configure the Security settings for the Wireless Adapter. Auth Mode: Select the authentication type from drop down list for: • Disable • Open System • Shared Key • • WPA-PSK • WPA2 • WPA2-PSK 6.3.1 Open System / Shared Key Wireless USB Adapter... -
Page 19: Wpa-Psk / Wpa2-Psk
USER MANUAL WEP Key 1~4: choose the encryption way, either in HEX or ASCII formats, and enter the password in the blank space. Key Length: select 64 or 128 bits as the length of the keys. If you select 64bit in Hex format, you must type 10 values in the following range (0~F, hexadecimal), or 64bit in ASCII format, you must type 5 values in the following range (0~9, A~Z and a~z Alphanumeric);... -
Page 20: Wpa / Wpa2
USER MANUAL 6.3.3 WPA / WPA2 If WPA or WPA2 is selected, the above screen is shown. Please select the encryption type from drop down menu and press Configuration button to configure parameters for the RADIUS server. Encryption: Select the encryption type for TKIP or AES encryption type. WARNING: WPA, WPA2 don’t support In Windows 98/ME . -
Page 21: Site Survey
USER MANUAL 6.4 Site Survey This screen allows user to scan for available wireless networks (wireless clients and Access Points). It also allows the user to establish wireless communications with an available wireless network. Available Network: displays the wireless networks (wireless clients and Access Points) that are in signal range. -
Page 22: Appendix A: Technical Specifications
APPENDIX A: Technical Specifications Radio Technology Interface Data Transfer Rate Receiver Sensitivity Frequency Range Modulation Schemes Channels Media Access Protocol Security Diagnostic LED Antenna General IEEE 802.11b Direct Sequence Spread Spectrum (DSSS) IEEE 802.11g Orthogonal Frequency Division Multiplexing (OFDM) USB Pen Size v1.1 / v2.0 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps 54Mbps: Typical -68dBm @ 10% PER (Packet Error Rate) -
Page 23: Appendix B: Support
APPENDIX B: Support If you have any problems with the Wireless USB Adapter, please contact the dealer where you bought this product. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land... - Page 24 Atlantis Land Via Pelizza da Volpedo, 59 20092 Cinisello Balsamo – MI – Italy info@atlantis-land.com Where solutions begin ISO 9001:2000 Certified Company...