the (1) hydraulic cylinder case
by
the (18) copper
NOTES:
packing 8 (3 pcs) and (17) bolts 8 x 22
(3
pcs),
a)
Ser the punch mark for the step 3 and step
5
and lock the (17) bolts 8 x 22 (3 pcs) in place
firring.
with (19) wire 0.8 x 220.
I
\
Punched mark
b)
Tightening rorque:
,
NOTE:
(21 Be sure rhere is no "play" benveen rhe ( 6 ) lifr
[ I ] Before step 1, align the center of the hole for rhe
crank pin and either the
(4)
lift crank or the (5) hydraulic
(2) bushing with rhe center groove line of the (1) hydrau-
piston rod;
and
benveen the
(6) I f f
crank pin and the
lic cylinder case
( 7 )
spring pin 5
x
28.