Table of Contents
Advertisement
3-3
Front Axle Assembly (YM155D, YM135D)
[Parts Having a Serial No. Before 510001
(1) Tighten (3) bolt 10
x 40 until there is not
any play between the (1) upper front gear case
and the (2) knuckle arm.
Tightening torque: 33-43 ft-lbs (4.5-6 kg-m)
(2) Tighten (4) nut 18
x 1.5 until there is not
any play between the (5) washer plate and the
(2) knuckle arm.
Tightening torque: 24-33 ft-lbs (3.3-4.5 kg-m)
Apply the adhesive agent to the threads of the
(6) king pin before tightening.
(3) Insert the (7) oil seal lOOx 120 x 12 to the
edge of the (8) lower front gear case.
(4) Attach to the (10) liner 22
x
41 x 2.3 the
larger inner diameter side of the lace of the (9)
thrust bearing 51 105.
(5) Insert the (1 1) bolt 10 x 40
as
illustrated.
, + j 2 3
in.
dlrnrn)
(1
I
Bolt 10x40
4+n""
I
I
Spring
washer 10
(6) Insert the (12) "O-ring P22 to the edge of
the (1) upper front gear case.
(7) Shim A & B : 25 x 35 x 0.1
25 x 35 x 0.3
(8) Tightening torque:
a)
(13) bolt 10 x 28 (2
pcs):
33-43 ft-lbs
(4.5-6.0 kg-m)
b)
(14) nut 10 (2 pcs): 33-43 ft-lbs (4.5-
6.0 kg-m)
C)
(15) bolt 10 x 22 (4 pcs): 18-24 ft-lbs
(2.5-3.3 kg-m)
d)
(16) bolt 8 x 22 (4 pcs): 9-12 ft-lbs
(1.3-1.7 kpm)
e)
(17) bolt 12 x 25 (4 pcs): 58-72 f t - l b ~
(8.0-1 0 kg-m)
Hide quick links:
Advertisement
Table of Contents
