Brother DCP-7030 Quick Setup Manual page 21

Installing the Driver & Software
11
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
If your machine shows APIPA in the IP
Address Field, click Configure IP Address
and enter an IP address for your machine that
is suitable for your network.
Note
• You can find your machine's IP address and the
node name by printing out the Network
Configuration List. See Print the Network
Configuration List on page 27.
• If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address window will appear.
Enter an IP address for your machine that is
suitable for your network.
12
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
Note
®
For Windows Vista , when this screen appears,
click the check box and click Install to complete
the installation properly.
13
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
14
Click Finish to restart your computer.
(After restarting the computer, you must be
logged on with Administrator rights.)
The MFL-Pro Suite has been installed and
the installation is now complete.
Note
• XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver when printing from the
applications that use the XML Paper Specification
documents. Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com.
• MFL-Pro Suite includes the Network Printer
Driver, Network Scanner Driver, Brother
ControlCenter3 and ScanSoft™ PaperPort™
11SE with OCR.
ScanSoft™ PaperPort™ 11SE is a document
management application for viewing scanned
documents.
• After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQ's in
Start/All Programs /Brother/DCP-XXXX LAN.
®
Windows
19