Alert Message - Pantech pursuit II P6010 User Manual

Alert message

If you experience any problem while using your mobile
phone, please refer to the following checklist. If the
problem still persists, contact your dealer or nearest
carrier.
When the "Insert SIM Card" message appears:
Make sure the SIM card is correctly installed. Check to see
if the SIM card is working properly. If it does not work, try
to clean the contact points of the card with a dry cloth. If
it is out of order, take it to your service provider.
When the "Messages full" message appears:
The received or saved messages are full in your phone
memory. You need to delete some messages.
When the "Phone and SIM messages are full.
Delete Messages" message appears:
The received or saved messages are full in your phone
and SIM card memory. You need to delete some
messages.
When the "Password" message appears in
Phone locked state:
Enter the phone password. The default password
is"1234". If you cannot remember the password, contact
your nearest carrier.
When the "Enter PIN1" message appears:
Input PIN1. If you cannot remember it, contact your
service provider.
You can still receive calls even if your mobile phone
becomes locked after entering the incorrect PIN1 on
three consecutive attempts.
When the "No Service" or "Network Search"
message appears:
If you cannot make/receive a call when you are indoors
or underground where the signal strength is poor,
move toward a window or go out to an open area. If you
still cannot make a connection, contact your service
provider.
01
02
03
04
05
06
07
08
77