Adjusting The Frame Latch - Schwinn S14 Folding Bicycle Owner's Manual

AdjusTING The FRAme lATch

Your bicycle should arrive with the frame latch properly
adjusted. However, the frame latch will need periodic
adjustment to keep it functioning optimally. Important! If
you are unsure of how to make these adjustments take the bike
to a qualified bicycle technician for professional adjustment.
• If you have an aluminum frame, the frame latch will open
and close with approximately 5-6 kg (11-13.2 lbs.) of force.
• If you have a steel frame, the frame latch will open and close
with approximately 3 kg. (6.6 lbs.) of force.
Adjust the latch bolt so that the latch opens and closes with the
correct amount of force (see above).
❶ Using a 10 mm wrench turn the frame latch bolt clockwise
to tighten the latch, counter-clockwise to loosen the latch.
Adjust in 1/16" turn increments until the latch is properly
adjusted. Figure 4.1
❷ Add a drop of Loc-Tite® glue to the bolt threads to prevent
loosening. Do not add Loc-Tite® glue to the hinges.
❸ Periodically lubricate the lever to keep it working smoothly.
Schwinn Folding Bicycle Manual.indb 25
cAuTIoN!
Some lubricants may damage the paint finish and corrode the
frame or hinges. Consult your dealer for advice on a good
quality lubricant.
Adjustments 4
Figure 4.1
25
7/1/14 3:59 PM