Attach The Pedals - Schwinn S14 Folding Bicycle Owner's Manual

3 Assembly

ATTAch The PedAls

WARNING!
Attachment of an incorrect pedal into a crank arm can strip the
pedal threads and cause irreparable damage. Before your first
ride, check to ensure your pedals are attached correctly.
If the bicycle came without the pedals attached follow
steps 1 - 6. If the pedals came with the pedals attached follow
step 5 only:
❶ Match the pedal marked R with the right-hand crank arm,
and match the pedal marked L with the left-hand crank arm.
Figure 3.5
❷ Place the threaded pedal into the threaded hole on the
crank arm.
❸ By hand, slowly turn the spindle toward the front of the
bicycle. Clockwise for right pedal, counterclockwise for left
pedal.
Important! Stop if you feel resistance! This may be an
indication the spindle is entering the hole at an angle.
Remove the spindle and redo step three.
❹ If the spindle entered the hole cleanly then use a 15 mm
wrench to tighten completely.
❺ Flip the pedals into the down position. Figure 3.6
20
Schwinn Folding Bicycle Manual.indb 20
3
Pedal in up
position
1
2
Figure 3.5
Pedal in down
5
position
Figure 3.6
7/1/14 3:59 PM