Schwinn S14 Folding Bicycle Owner's Manual page 19

3 Assembly
lock the Frame latch
❶ Push on quick-release
lever and move the
locking pin up. Figure 3.3
❷ Move the two frame
halves together. Release
pressure on the quick-
release lever. Check that
the locking pin is fully
engaged.
❸ Move the lever into the
slot on the frame.
❹ Move the quick-release
lever into the locked
position. The bicycle
should arrive with the
quick-release lever
properly adjusted but if it
is not see Section 4:
Adjusting the Frame
Latch.
Important! It should require
some pressure to engage the
lock and your hand should
have indent marks from the
lever. Adjust the quick-release
lever until it is firmly engaged.
18
Schwinn Folding Bicycle Manual.indb 18
Quick-release lever
1
Locking pin
3
2
4
Figure 3.3
7/1/14 3:59 PM