Example Of Teach In Programming - Pfaff 1491E1 Instruction Manual

Programming
This seam section should have
- stitch counting ( 1 stitch )
- and a stitch length of 3.5 mm.
Enter
Enter
3 5
Enter
Enter
11

Example of Teach In programming

.15.03
The following seam is to be created:
The seam to be programmed is
- to contain 3 seam sections
- and to be saved with the comment "Learn"
- at the program number 8.
11 - 31
Program the fourth (last) seam section:
Select the seam section end function ( number key 9 ).
Select the stitch counter function to open the input menu.
Enter the number of stitches.
Confirm the entry with the Enter key.
Confirm the seam section end by pressing the Enter key.
Select the stitch length function ( number key 4 ).
Enter the stitch length.
Confirm with the Enter key.
Select the program end function ( number key 0 ).
Confirm the decorative seam by pressing the Enter key.
Seam section 2
Seam section 1 Seam section 3