Advancing The Line Manually; Maintenance & Cleaning; General Inspection; Repairs - ALDI 50750 User Manual

Advancing the line

Advancing the line manually

WARNING: Always ensure the engine is turned off before
undertaking this task.
1. Push the bump knob (20) in while pulling on both lines to manually
advance the line.
2. Release the bump knob (20) and again pull on both lines to advance the
line further.
3. If the line still does not advance, remove the spool and check the lay of
the line. It may be twisted or trapped under over laying line.
Maintenance & Cleaning

General inspection

• R egularly check that all the fixing screws are tight. They may vibrate loose
over time.
• A lways check when first starting the motor for each use that the cutting
head is not rotating under the power of the motor when the motor is
at idle.
• D o not perform any maintenance procedures with the motor in
operation.
• E nsure the motor has stopped, and the on/ off switch (10) is in the
STOP position.
• T he spark plug cover/cap should be removed from the spark plug.
• O nly use original Gardenline replacement cover/cap when component
parts require replacement.

Repairs

79
Repairs beyond those described above, should only be undertaken by
trained personal. Should a malfunction occur do not use the unit any further
and do not attempt to repair it yourself. Contact Customer Service
on 1800 909 909, or have the unit repaired by an approved Service Agent.
26
e-mail: help@powertoolsupport.com
MODEL: №. 50750 • 11/2015 • WLBC260X-2WNO
26cc 2 Stroke Line Trimmer
AFTER SALES SUPPORT
1800 909 909
(toll free)