Filling The Tank - ALDI 50750 User Manual

26cc 2 Stroke Line Trimmer

Filling the tank

WARNING: Always ensure the engine is turned off before undertaking
this task.
Never add fuel to a machine with a running or hot engine. Move at least
9m (30 ft.) away from the refuelling site before starting engine. Do not smoke
when refuelling or operating the line trimmer.
NOTE: It is normal for smoke to be emitted from a new engine during and
after first use.
1. Rest the line trimmer on the ground or a secure
surface such that it is resting on the fuel tank (6) and
wipe any debris from around the fuel tank cap (5).
2. Unscrew the fuel tank cap (5) and pour the mixture
into the tank with the aid of a funnel. (Fig AD)
NOTE: Be careful not to spill any mixture. If this
happens, wipe the spill with a clean rag.
Secure fuel tank cap (5).
3. Start the engine at least 9ft (30m) away from the area where the fuel tank has
been filled up in order to avoid any risk of fire.
• Always use extreme care when handling fuel! Fuel is highly flammable.
• N ever attempt to fuel the line trimmer if the fuel system components are
damaged or are leaking.
• N ever attempt to refuel the engine while it is running or still warm, allow it to
cool before fuelling.
• N ever smoke or light any fires near the line trimmer or fuels.
• Always transport and store fuels in an approved container.
• Never place flammable material close to the engine muffler.
79
• N ever operate the line trimmer without a properly functioning muffler and
spark plug cover installed.
• N ever operate the line trimmer unless it is properly assembled and in good
working condition.
• D o not use ethanol based fuels as it may damage the fuel lines and other
engine parts.
• M ix only enough fuel for your immediate needs. Do not store pre-mixed fuel.
AFTER SALES SUPPORT
1800 909 909
(toll free)
e-mail: help@powertoolsupport.com
MODEL: №. 50750 • 11/2015 • WLBC260X-2WNO
Filling the tank
AD.
19