Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual.
Page 3
• Leave space around the TV set as shown below. The diameter and length of the screws differ depending on the • It is strongly recommended that you use a Sony Wall-Mount Wall-Mount Bracket model. Bracket in order to provide adequate air-circulation.
Handling and cleaning the screen surface/ cabinet of the TV set Be sure to unplug the AC power cord (mains lead) connected to the TV set from AC power outlet (mains socket) before cleaning. To avoid material degradation or screen coating degradation, observe the following precautions.
Attaching the Table-Top Stand (Alternative) You can change the Table-Top Stand from the edge to the middle position by referring to the instructions below. Middle position Note • Two or more people (three or more people for Note KD-75S9000B) are needed to carry out this •...
To bundle the cables Using the Remote Control You can operate the TV by using the supplied Touchpad Remote Control or IR (infrared) Remote Control. Touchpad Remote Control Remote Control Note Location of cable clamper when the Table-Top Stand •...
Launching the Touchpad Tutorial Connecting Other Devices Press HOME. For more information on connections, refer to the i-Manual. To connect with an HDMI cable Note • Connect 4K devices (4K Media Player, 4K Set Top Box, etc.) to the HDMI IN 2 or HDMI IN 1 jack of the TV to enjoy copyright protected content.
Page 9
To connect with AV composite cables The TV simultaneously charges the MHL- compatible connected device while playing photo/music/video files. You can use the TV remote control to control the connected MHL- compatible device. Note • If [Auto Input Change (MHL)] is set to [On], the TV automatically switches to HDMI IN 2/MHL or HDMI IN 4/MHL from other input when MHL-compatible device is connected to HDMI IN 2/MHL or HDMI IN 4/...
Page 10
Picture Quality • AV composite cable • Component cable • HDMI cable • Antenna (aerial) cable 4K/HD Standard definition (SD) videos have picture signals with a High definition (HD) videos have picture signals vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines. with a vertical resolution of 720 or 1,080 lines.
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 12
Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket. Mounting Hook Screw (+PSW 6 × 16) Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall.
Page 13
Detach the Table-Top Stand from the TV. Note • When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV. Install the TV on the wall. Model Name Screw location Hook location 75S9000B...
SU-WL450 (KD-65S9000B only) Remove the screws from the rear of the TV. Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by referring to "1" of the Wall-Mount Bracket Installation Guide. Standard mounting Pulley Screw (+PSW 6 x 20) ...
Page 15
Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 18-21 (Specifications) for the TV’s weight. KD-65S9000B Slim mounting Standard mounting...
Page 16
Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the Wall” of Operating Instructions supplied with the Wall-Mount Bracket. Model Name KD- Hook location 65S9000B Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
See below illustration for location of the buttons If the problem persists, contact your dealer or on the TV. Sony service centre with the number of times Rear of TV the Illumination LED flashes red (interval time is three seconds). Press / on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre.
• The Bluetooth® word mark and logos are • Manufactured under license from Dolby owned by the Bluetooth SIG, Inc. and any Laboratories. use of such marks by Sony Corporation is Dolby and the double-D symbol are under license. Other trademarks and trade trademarks of Dolby Laboratories.
請參閲下圖有關電視機上按鈕的位置。 當照明 LED 閃紅燈時,計算閃爍次數 (間隔時間 電視機背面 為三秒) 。 如果照明 LED 閃紅燈,從電視機拔下 AC 電源線, 待兩分鐘之後再打開電視機,以進行電視機重設。 如果問題仍然存在,請聯繫您的經銷商或 Sony 服 務中心並告知照明 LED 閃紅燈的次數 (間隔時間 為三秒) 。按電視機上的 / 將其關閉,拔掉 AC 電源線,然後告訴您的經銷商或 Sony 服務中心。 照明 LED 開啓。 當發光 LED 沒有閃爍,檢查以下列表中的項目。 您也可參閱 i-Manual 中的 [ 故障排除 ] 或通過選...
Page 38
額定輸出 USB 1, 3: 5 V, 500 mA MAX Corporation 的商標。 USB 2: 5 V, 800 mA MAX • TrackID 是 Sony Mobile Communications AB MHL (HDMI IN 2, 4): 5 V, 900 mA MAX 的商標或註冊商標。 • Gracenote、Gracenote eyeQ、Gracenote ×...