Package Contents; Minimum System Requirements - NetComm V110 User Manual

firmware Upgrade
• TFTP
• HTTP
Interface
1 WAN port interface
1 LAN port interface
1 PSTN port interface (FXO) (Optional)
1 VOIP port interface (FXS)

PAckAGe contentS

Your NetComm ATA package contains the following items:
• V2xx ATA
• Quick Installation Guide
• User Guide and Software on CD
• RJ-45 Straight-through Ethernet Cable
• DC12 volts/0.6 A Power Supply Unit
• One RJ-11 telephone cable (V210P / V211 only)

mInImUm SyStem reQUIrementS

Before continuing with the installation of your Netcomm V2xx ATA, please confirm that you comply with the
minimum system requirements:
• Broadband (ADSL or Cable ) connection
• PC with TCP/IP networking protocol installed
• Windows XP/Vista PC for Easy Setup Utility
• VoIP account with a VSP (VoIP Service Provider)
YML881Rev1
www.netcomm.com.au
Security
• HTTP 1.1 basic/digest authentication for Web setup
• MD5 for SIP authentication (RFC2069/ RFC 2617)
modem & fax modes
• G.711 fax/modem pass-through with fax/modem detection
• T.38 support
�11��� ��1���� ��11�� ���� User Guide �11��� ��1���� ��11�� ����