Software Installation - Audiotrak MAYA1010 Manual

MAYA1010

7. Software Installation

After completing the hardware installation, you need to install the Windows
driver. The installation steps in Windows 98SE, Windows ME, Windows 2000
and Windows XP vary, but they are similar between the different versions of
Windows. The installation steps shown below are based on Windows XP
installation.
Note: Depending on your system, you may need the Windows installation CD.
Note: MAYA1010 installs several drivers during its installation process.
Windows will repeatedly prompt you to reboot the system, but unless the driver
installation is completely finished, DO NOT reboot the system. After complete
installation, restart your computer.
1. Turn on your computer. Windows will automatically detect a new device and
prompt you with Found New Hardware Wizard screen. Choose "Install from a
list or specific location" and click Next.
2. Choose "Search for the best driver in these locations" and specify the
location of the driver. Insert the provided driver CD into the CD-Rom drive and
select "Include this location in the search" and click Browse to find the driver's
location. For example, it is E:\AUDIOTRAK\MAYA1010\, if E:\ is your CD-Rom
drive.
- 9 - 9