Control Panel; Directwire 3.0 - Audiotrak MAYA1010 Manual

MAYA1010

4. DirectWIRE 3.0

Clicking this menu will open the DirectWIRE 3.0 screen. DirectWIRE 3.0 is a
unique feature of the E-WDM driver that transfers digital audio data internally
within different applications. MME, Multi-MME, ASIO and GSIF indicate the
different drivers supported by MAYA1010. The numbers along the column
designate the channel number of the inputs and outputs.
Please refer to Section 10, Using DirectWIRE 3.0 on page 21 for more detailed
instructions and examples on using DirectWIRE 3.0.

5. Control Panel

You can come back to the panel control screen by clicking this menu. It is also
the default screen you see when you first launch the panel. Basic functions of
MAYA1010 are controlled from this screen.
1) INPUT: You can change the input monitoring level on all channels (1~8,
S/PDIF) by clicking and dragging the fader bar. The number on the
bottom shows the relative amount in dB. Clicking this number enables
you to mute the channel.
You can control gain from -60dB to +15dB (0.5dB per step) on input ch
1/2. Also, input ch 1/2 supports +12V phantom power microphone. To
use the microphone you must change the input level to "M" (microphone)
from "L" (line input). After selecting "M", you can select "12" (12V) on
each channel for phantom power.
- 15 - 15