HP StorageWorks X9320 Administrator's Manual page 19

file. For example, you will need to lock specific ports for rpc.statd, rpc.lockd,
rpc.mountd, and rpc.quotad.
It is best to allow all ICMP types on all networks; however, you can limit ICMP to types 0, 3,
8, and 1 1 if necessary.
Be sure to open the ports listed in the following table.
Port
22/tcp
9022/tcp
123/tcp, 123/upd
5353/udp
12865/tcp
80/tcp
443/tcp
5432/tcp
8008/tcp
9002/tcp
9005/tcp
9008/tcp
9009/tcp
9200/tcp
2049/tcp, 2049/udp
1 1 1/tcp, 1 1 1/udp
875/tcp, 875/udp
32803/tcp
32769/udp
892/tcp, 892/udp
662/tcp, 662/udp
2020/tcp, 2020/udp
4000:4003/tcp
137/udp
138/udp
139/tcp
445/tcp
9000:9002/tcp
9000:9200/udp
20/tcp, 20/udp
21/tcp, 21/udp
7777/tcp
8080/tcp
5555/tcp, 5555/udp
631/tcp, 631/udp
Description
SSH
SSH for Onboard Administrator (OA); only for X9720 blades
NTP
Multicast DNS, 224.0.0.251
netperf tool
X9000 management console to file serving nodes
X9000 management console and X9000 file system
Between file serving nodes and NFS clients (user network)
NFS
RPC
quota
lockmanager
lockmanager
mount daemon
stat
stat outgoing
reserved for use by a custom application (CMU) and can be disabled if not used
Between file serving nodes and CIFS clients (user network)
Between file serving nodes and X9000 clients (user network)
Between file serving nodes and FTP clients (user network)
Between X9000 management console GUI and clients that need to access the GUI
Dataprotector
Internet Printing Protocol (IPP)
Configuring ports for a firewall 19