Advertisement
2. Sync Button Procedure
Note: It is recommended to plug the adapters into nearby outlets before installing the devices to the desired locations.
Push Sync button for 3
1
seconds, then release.
PL (Powerline) LED
will blink.
A
Internet
Push Sync button
2
for 3 seconds, then
release. PL LED will
blink.
(On Adapters A & B)
3
B
PL LED will turn
solid when
connected.
3
Connect Additional Adapters using the Sync button
(On Adapter A or B) Push Sync
1
button for 3 seconds. Then
release. PL LED will blink.
(On Adapter C) Push Sync
2
C
button for 3 seconds, then
release. PL LED will blink.
(On All Adapters) PL LED will
3
turn solid when connected.
4
Advertisement
