Driver Installation - Clevo w110er User Manual


Driver Installation General
Guidelines
As a general guide follow the
default on-screen instruc-
tions for each driver (e.g.
Next > Next > Finish) unless
you are an advanced user. In
many cases a restart is re-
quired to install the driver.
Make sure any modules (e.g.
PC Camera, WLAN or 3.75G/
HSPA) are ON before install-
ing the appropriate driver.
Windows Update
After installing all the drivers
make sure you enable Win-
dows Update in order to get
all the latest security updates
etc. (all updates will include
the latest hotfixes from Mi-
crosoft).
18

Driver Installation

The Device Drivers & Utilities + User's Manual disc contains the drivers and utilities
necessary for the proper operation of the computer. This setup will probably have al-
ready been done for you. If this is not the case, insert the disc and click Install Drivers
(button), or Option Drivers (button) to access the Optional driver menu. Install the
drivers in the order indicated in
stall (you should note down the drivers as you install them). Note: If you need to re-
install any driver, you should uninstall the driver first .
If the Found New Hardware wizard appears during the installation procedure, click
Cancel to close the window, and follow the installation procedure as directed.
Figure 8. Click to select the drivers you wish to in-
Driver Installation & Power
When installing drivers make sure
your computer is powered by the
AC/DC adapter connected to a
working power source. Some driv-
ers draw a significant amount of
power during the installation proce-
dure, and if the remaining battery
capacity is not adequate this may
cause the system to shut down and
cause system problems (note that
there is no safety issue involved
here, and the battery will be re-
chargeable within 1 minute).
Figure 8 - Install Drivers
