Related Manuals for Vax DynamoPower U84-DY-Pe
Summary of Contents for Vax DynamoPower U84-DY-Pe
- Page 1 DynamoPower MORE REACH MORE CAPACITY LET’S GET STARTED. U84-DY-Pe U84-DY-Re U84-DY-Te...
-
Page 2: Let's Talk Safety
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. Basic • Keep fingers, hair and loose clothing away from moving parts safety and openings whilst using the vacuum cleaner. - Page 3 Cleaning and user maintenance shall not be made by children without supervision. • Only Vax recommended tools should be used with the vacuum cleaner, use of non-branded Vax accessories/tools will invalidate your warranty. (lighter fluid, petrol, kerosene etc) or use the vacuum cleaner in an area with explosive vapours or liquid.
- Page 4 Maintaining your carpets and hard floors will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
-
Page 5: Table Of Contents
Contents Dynamo Power Pet, Reach (Included in all models) Included with Let’s talk safety your machine Getting to know your machine Hard Floor Adaptor Getting started TurboTool Using your machine 2-in-1 Tool Taking care of your machine Notes Tool Connector Accessories Dynamo Power Total Home... -
Page 6: Getting To Know Your Machine
Voltage Please refer to product rating label Belt Kit (Type 1)* Wattage Please refer to product rating label 1-1-130669-01 Cord length 8-10m TurboTool (Type 6)* 1-1-134419-00 Weight 6.2kg Subject to technical change without notice. To purchase consumables and accessories, please visit vax.co.uk... -
Page 7: Getting Started
Getting started Before you Begin CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments or removing and emptying the dirt container. CAUTION: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off. - Page 8 Getting started CAUTION: Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories. The accessories can be attached to the handle or directly to the hose. When using accessories on the hose/handle raise the height adjuster to the highest setting.
-
Page 9: Using Your Machine
Using your machine IMPORTANT: Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories. The accessories can be attached directly to the hose. This vacuum cleaner is fitted with a constantly rotating brush bar. To avoid damage to your flooring, make sure the brush bar is raised to the highest setting when using the accessories. - Page 10 Using your machine Using the handle and accessories Pull to release the stretch Pull to remove the Line up and push the Press the handle release hose from the hose guides. accessory hose end of the accessory clip, pull to remove from the base of the hose into the stretch hose.
- Page 11 Let’s talk technical IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the filters .
-
Page 12: Taking Care Of Your Machine
Taking care of your machine Cleaning the separator Turn the dirt container lid Pull the filter tab to remove Lift the separator out Tap the separator over anti-clock wise to unlock, the pre motor filter. of the dirt container. a bin to remove any lift to remove the lid from dirt/debris. - Page 13 Let’s talk technical Post motor filter maintenance CAUTION: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. Using a pair of scissors Slide the locking ring Lift to separate the Line up the tabs on front remove any threads to remove.
-
Page 14: Replacing The Belt
Let’s talk technical Replacing the belt Lie vacuum cleaner Lift the top cover from the Lift out the brushbar to on its back exposing base of vacuum cleaner. remove. Remove and brushbar. Use a crosshead dispose of the old belt. screwdriver to remove Remove any threads 10 screws. - Page 15 Let’s talk technical Replacing the belt Line up the tabs on the Line up the top cover Press top cover down into opposite side of the with the base making sure place whilst lifting the base brushbar with the tabs on the tabs on the top cover to secure in to position.
-
Page 16: Notes
Notes... -
Page 17: Accessories
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach... -
Page 18: What To Do If It Goes Wrong
What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your vacuum cleaner. There is an accessory missing? • The plug may not be fully pushed into the electrical socket. •... -
Page 19: Getting In Touch
Getting in touch † Registration required. Terms and conditions apply, see vax.co.uk for details. * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling. - Page 20 Local Authority or retailer for recycling advice. © 2015 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge is the property of Techtronic Floor Care Technology Ltd and is registered in the EU and may be pending or registered in other countries.