Vax DynamoPower U84-DY-Pe User Manual page 13

Post motor filter maintenance
CAUTION: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
Using a pair of scissors
remove any threads
or hair caught around
the brush bar.
Removing a blockage from the hose
Press the release clip
on the stretch hose,
pull to remove hose
from the handle.
Slide the locking ring
to remove.
Insert a broom handle
or similar blunt
instrument into the
hose to remove blockage.
Let's talk technical
Lift to separate the
housing. Using a pair
of scissors remove any
threads or hair caught
around the brushbar.
Line up the tabs on front
of housing and re-fit.
Slide locking ring into
groove to secure.
To test for a blockage
in hose, drop a small
ball of paper through
the hose whilst removed
from the machine.
The paper will drop
through if the hose
is clear