Specific Instructions; Loss Or Destruction Of The Master Key; Loss Or Destruction Of One Black Key; Precautions For Use - PEUGEOT ACI -100 Workshop Manual

LOSS OR DESRTUCTION OF THE MASTER KEY (red key)
1.
Loss or destruction of the master key makes memorisation or erasing black keys from the memory
impossible. The ACI 100 immobiliser unit will enable the vehicle to be started using the black keys memorised
but with the risk of the vehicle being stolen using the master key in the event of it being lost. In order to make
the system safe again, it is compulsory to replace the ignition switch and the ACI 100 immobiliser unit.
2. LOSS OR DESRUCTION OF THE BLACK KEY
In the case of a black key being lost it is impossible to erase it from memory without possessing
another black key as it is obligatory for memorisation to consist of a black key as well as the master key. In
order to neutralise the lost key, a blank key has to be ordered from our Spare Parts Service under the
reference 753067, then after having reproduced the shape of the key onto the specific blank have the new
key memorised. This will rule out the possibility of the vehicle being started using the lost key.
3. REPLACING THE KEY CONTACT SWITCH
Replace the key contact switch. Remove the transponder delivered with the new master key (red
key) and replace it with the transponder fitted in the previous master key. Carry out the memorisation
procedure for the keys so that the immobiliser unit can memorise the new black key.
4. REPLACING THE ACI 100 IMMOBILISER UNIT
If the immobiliser unit is defective it is possible to replace it with a new and blank unit ( not coded ). It
is not possible to use a unit from another vehicle for testing ( unit coded ).
YOU SHOULD CHECK THAT THE IGNITION WORKS
The programming of the keys is actually irreversible and should only be carried out when it is certain
that it is the ACI 100 unit that is defective.
Programme the new unit by carrying out the key memorisation procedure (previous chapter).
The existence of an interference suppresser (5KΩ resistance) is compulsory in order for the
system to function.

SPECIFIC INSTRUCTIONS

AT 2000 rpm BEFORE PROGRAMMNG IT !

PRECAUTIONS FOR USE

5