Changhong Electric 3d60c4000i Operation Manual page 24

Menu Operation
Use the direction buttons to select the
press ENTER to closes the keyboard.
Press MENU button to return to the Connection
menu.
10. When done, press the Blue button on your remote.
The Network Connecting screen appears. Wait until
the connection confirmation message is displayed.
NOTE:
The password box supports up to 22 characters.
•
– How to set up manually (Wireless)
To enter the Network settings into your TV, follow these steps:
1. Follow Steps 1 through 4 in the "How to set up automatically (Wireless)".
2. Press the ▲/▼ button to select Configuration, and then press the ENTER button.
3. Set Conf. to Static.
4. Press the ▲/▼ button to highlight IP, and then press the ENTER button.
5. Press the ▲/▼ button to highlight the field you want to change, and then use the
number buttons to input the IP address. When done, select the OK and press
ENTER save the setting.
6. Press ▲/▼ to highlight Netmask, Gateway and DNS, and edit in the same way as
IP address.
7. When done, press MENU button to return to the Configuration menu.
8. Press the ▲/▼ button to go to Base Station. Select your network, and then press
the ENTER button.
9. Go to Step 6 in the "How to set up automatically (Wireless)", and follow the
directions from that point on.
If Your TV Fails to Connect to the Internet：
• Your TV may not be able to connect to the Internet because your ISP has
permanently registered the MAC address (a unique identifying number) of your PC
or modem, which it then authenticates each time you connect to the Internet as a
way of preventing unauthorized access. As your TV has a different MAC address,
your ISP can not authenticate its MAC address, and your TV can not connect.
• To resolve this problem, ask your ISP about the procedures required to connect
devices other than a PC (such as your TV) to the Internet.
• If your Internet service provider requires an ID or password to connect to the
Internet, your TV may not be able to connect to the Internet.
• The internet connection may fail because of a firewall problem. If this is the case,
contact your Internet service provider.
and
English22