Where To Be Careful; After Washing; Seat Care - Triumph Thunderbird LT Owner's Handbook Manual

Maintenance and Adjustment
surfaces, if the same sponge or cleaning
cloths are used.

Where to be Careful

Avoid spraying water with any great force
near the following places:
• Instruments;
• Brake cylinders and brake calipers;
• Under the fuel tank;
• Steering head bearings.
Caution
Do not spray any water at all under the
rider's seat. The rider's seat has the
engine's air intake duct fitted to its base
and any water sprayed in this area could
enter the airbox and engine, causing
damage to both items.
Caution
Use of high-pressure spray washers is not
recommended. When using
washers, water may be forced into
bearings and other components causing
premature wear from corrosion and loss of
lubrication.
Note:
• Use of soaps that are highly
alkaline will leave a residue on
painted surfaces, and may also
cause water spotting. Always use a
low alkaline soap to aid the
cleaning process.
118

After Washing

Remove the plastic bags and tape, and clear
the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle operation.
Start the engine and run it for 5 minutes.
Ensure adequate ventilation for the exhaust
fumes.
Use a dry cloth to absorb water residue. Do
not allow water to stand on the machine as
this will lead to corrosion.
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil-free brake disc
cleaner.

Seat Care

pressure
Use of chemicals or high-pressure spray
washers is not recommended for cleaning
the seat. Using chemicals or pressure
washers may damage the seat cover.
To help maintain its appearance, clean the
seat using a sponge or cleaning cloth with
soap and water.
Warning
Caution