Optical Disk Drive; Kvm Switch - NEC R320A-E4 System Configuration Manual

System Configuration Guide

Optical disk drive

[Note]
-Writing function is not supported.
-Optical disk drive is not accessible after installing ft Server Control Software. Optical disk drive is not accessible after installing ft Server Control Software.
If you need to access the Optical disk drive, use the following command for temporary If you need to access the Optical disk drive, use the following command for temporary
use.
# /opt/ft/sbin/enable-usb-storage
Using Optical disk drive is not recommended. Using Optical disk drive is not recommended.
Optical disk drive:
USB
Interface Slimline DVD-RAM drive included in the front panel as standard
1 internal
connector

KVM switch

[Note]
- ft Server must be connected to the master KVM switch when cascade connection. ft Server must be connected to the master KVM switch when cascade connection.
- Be sure to apply PS/2 typed keyboard/Mouse to connect to KVM switch. Be sure to apply PS/2 typed keyboard/Mouse to connect to KVM switch.
- Updating the keyboard information is required after the installation has been complete, Updating the keyboard information is required after the installation has been complete,
because the operating system recognizes the keyboard as a 101 keyboard. because the operating system recognizes the keyboard as a 101 keyboard.
- Reconnect the cables or reset the KVM switch if the keyboard and mouse are out of Reconnect the cables or reset the KVM switch if the keyboard and mouse are out of
function after CPU/IO module fail over. function after CPU/IO module fail over.
Sample configuration
Switch unit connection cable Switch unit connection cable
USB
set [K410-118(xx)]
Interface
Switch unit connection cable
set [K410-119(xx)]
D-sub 15pin
Interface
Express5800/100 Series
Switch unit connection cable
set [K410-119(xx)]
Express5800/100 Series
Product List
KVM switch:
N8191-10F
Cables:
K410-118(1A)
K410-118(03)
K410-119(1A)
K410-119(03)
K410-104A(03)
Keyboard/Mouse:
N8170-15
storage
RAM drive included in the front panel as standard
Server Switch Unit Server Switch Unit
(8Port/USB) [N8191 (8Port/USB) [N8191-10F]
Switch unit connection cable Switch unit connection cable
set [K410 set [K410-119(1A)]
PS/2
Server Switch Unit Server Switch Unit
(8Port/USB) [N8191-10F] (8Port/USB) [N8191
PS/2
Server Switch Unit(8Server/USB) Server Switch Unit(8Server/USB)
Switch unit connection cable set Switch unit connection cable set
Switch unit connection cable set Switch unit connection cable set
Switch unit connection cable set Switch unit connection cable set
Swtich unit connection cable set Swtich unit connection cable set
Display/Keyboard extension cable Display/Keyboard extension cable
104Keyboard
2 button w/ wheel mouse 2 button w/ wheel mouse
1st Edition August '10 1st Edition August '10
NEC Express5800/R320a-E4/M4
Master
LCD Monitor LCD Monitor
<Local procurement>
104 Keyboard
<Local procurement>
2 button w/ wheel mouse
Slave
[N8170-15]
Cascade connection of KVM
switches is allowed up to two
tiers.
1U or Desktop
KVM unit – Server, USB, 1.8 m
KVM unit – Server, USB, 3 m
KVM unit – Server, PS/2, 1.8 m
KVM unit – Server, PS/2, 3 m
KVM unit – Keyboard/Mouse, PS/2, 3 m
PS/2
PS/2
Page 10