Table of Contents
Advertisement
other important features
Over-temperature thermostat
The fryer is fitted with a manually resettable over-temperature thermostat. This is a safety
device that will switch off your fryer if it becomes too hot, or if there is too little or no oil
present.
If the over-temperature thermostat has operated, switch off and unplug your fryer and
allow it to cool down completely. If required, fill with new clean oil above the MIN
mark and not exceeding the MAX mark. The reset button can be found after removing
the control panel. It is recessed and requires the use of a small screwdriver or similar
implement. Press the button to reset the thermostat then plug your fryer back in.
Reset Button
Cool zone
There is a cool zone area below the element that ensures that any stray pieces of food
which have dropped to the bottom will not burn and contaminate the oil. After cooking wait
until the oil has cooled completely then drain the oil to remove the scraps.
6
Advertisement
Table of Contents
